Arm-electronics CMS Bedienungsanleitung PDF herunterladen (Seite 84)

User’s Manual

Refer to the following for description of motion detection settings.

Enable Function: Check on it to start monitor motion detection.

Motion recording: Check on it and CMS will record event video when motion

is detected. The length of event video will follow <Event Recording Duration>

specified in Event setting.

Show Motion Detection Region:

Check on it to display the detection area

visually on the monitoring screen. The boxes will also be captured and

displayed on the snapshot images.

Start Simulation: Click on it to start simulating motion detection. As shown

above, red boxes will mark the motion areas.

Stop Simulation:

Click on it to stop simulation.

Sensitivity: Setup a desired sensitivity level.

Click on <OK> to apply the settings, or click on <Cancel> to disregard and

return to Live mode.

NOTE: When motion alert is triggered, an alert icon “ ” will be

displayed at bottom-left of the grid.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 121 122

Keine Kommentare

Arm-electronics CMS Bedienungsanleitung Seite 84